Best in class TV Whitespace wireless solution with industry leading throughput and range to meet the most demanding of deployment challenges. The GWS-5000 is the fifth generation of TV Whitespace radio developed by 6Harmonics. With industry-leading throughput and range to meet the most demanding deployment challenges, the GWS-5000 series is the most advanced and highest power TV Whitespace solution currently available in the market. Ideal for challenging links such as those facing in-band noise & interference or even Non-Line-of-Sight conditions, the GWS-5000 has the power and features to ensure a rock-solid, high-capacity PTP & PMP connection.
Applications
- Rural connectivity:
- Backhaul
- Access
- Industrial connectivity (O&G, Mining, Forestry, Utilities, Precision Agriculture)
- Backhaul
- Access
- IOT connectivity:
- Lora
- Unmanned connectivity
- Gov.: MOT, DOD/MOD, MOE
- Onshore and Offshore operations
- Video surveillance & security backhaul
- Isolated remote 4G & 5G-SA backhaul
- Public safety communications
Key Features
- L2-transparent network wireless bridge
- Operable from single, to quad-channel enabling optimum usage of available RF channels
- Capable of up to 95Mbps Layer 3 (UDP) traffic
- Less than 5ms RTD under ideal radio propagation
- Up to 36dBm of transmit power subject to regulation
- Operates in backhaul mode and access mode
- 2x2 MIMO Bidirectional as backhaul
- 2x2 MIMO, to Rx diversity as access
- Rapid Sector Re-selection
- Smart Queue Management (SQM) & Active Queuelength Management (AQM) provides perflow traffic shaping, ensuring QoS
- Remote management via HTTP and SNMP
- IP-67 Rating
Radio Specifications
Frequencies | 470MHz – 698MHz (US & Canada) 470MHZ – 702MHZ (UK, EU, African.) |
Channel Bandwidth | 2,4,6,8,12,16,18,24MHz |
Transmit Power | Up to 36dBm combined (2+2 watts) (regulatory limited by region) |
Receive Sensitivity | -98dBm typical @ 5MHz |
Modulation / Coding | Automatic & Dynamic MCS selection from QPSK1/2 to 64QAM5/6 |
Wireless Security | Optional Over-the-air encryption |
Network Specifications
Connectivity | 10/100 Ethernet |
IP | IPv4 |
Management | Management via web-based GUI (HTTP/HTTPS) or SNMP (v2) |
Electrical Specifications
Input Power | 50-56V Passive POE++ 1/2, 4/5 (+); 3/6, 7/8 (-) |
Power Consumption | BTS: 45w peak, 30w average CPE: 35w peak, 25w average |
Power Protection | Ethernet surge suppression recommended for both BTS and CPE Lightning surge suppression recommended for both BTS and CPE between radio and antenna |
Mechanical and Environmental Specifications
Dimensions | BTS: 31cm x 31cm x 8.5cm CPE: 24cm x 24cm x 11cm |
Weight | BTS: 4.35kg CPE: 2.81kg |
Connectors | 2x N-type female RF 1x RJ45 10/100 Ethernet |
Operating Temperature | -40℃ to +50℃ ambient |
Operating Humidity | 5 – 100% non-condensing |
Standards and Regulatory Compliance
Canada | RS-222 Issue 2; RSS-GEN; RSS-102 |
Europe | EN 301 598 V1.1.1, EN 301 598 V2.1.1(partial) EN 301.489-1 |
USA | FCC CFR 47 Part 15 Sub-part H |
CE Mark | Electromagnetic Compatibility Directive (2014/30/EU) Radio Equipment Directive 2014/53/EU Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) General Product Safety Directive 2001/95/EC |
IETF | RFC 7545 (PAWS) RFC 8290 (SQM) |
Download PDF
Radio Specifications -OLD
Receive sensitivity | 6MHz channel width, -98dBm typical
8MHz channel width -97dBm typical |
Receive noise floor | -103dBm / 6MHz typical |
Receive gain control | Automatic or Manual |
Conducted Power per Spatial Stream | Max of 27.8dBm (FCC) |
Max 27.8dBm / 8MHz (ETSI Class 1) | |
33dBm (Other) | |
39dBm (Other, DC supply required) | |
Transmit power control | Automatic or manual (1dBm increments) |
Modulation
|
Automatic adaptive OFDM BPSK ½ rate to 64QAM rate per stream (MCS0 to MCS7)
MIMO/STBC (MCS 8 to MCS15) Manual MCS upper limit option. |
Medium Contention Management | CSMA with RTS / CTS Mode on client station
Airtime fairness mode (ATF) for downlink TDMA mode for uplink |
Network monitoring | SNMPv2, proprietary MIB file |
Packet aggregation | High throughput (HT) mode supported |
Security | PSK, 256bit AES encryption |
Load balancing | SSID, ATF & TDMA |
Network management | User defined IP address, sub-net, gateway and DNS |
Standards and Regulatory Compliance - OLD
Europe | EN 301 598 V1.1.1; EN 301 598 V2.1.1[1]; EN 301.489-1 |
USA | FCC CFR 47 Part 15 Sub-part H [2] |
CE Mark | · Electromagnetic Compatibility Directive (2014/30/EU)
· Radio Equipment Directive 2014/53/EU · Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) · General Product Safety Directive 2001/95/EC |
[1] EN 301 598 V2.1.1 (2018-1) Notified body opinion performed by Nemko (1622). Certificate number: 192101, issued 20th June 2019.
[2] Granted 3rd September 2019
Power Specifications - OLD
Power supply | 50-56V Passive POE++ 1/2, 4/5 (+); 3/6, 7/8 (-) |
Power consumption | 33dBm maximum transmit power: 35W boot, 30W on transmit, 15W receive
Average power consumption 25W, traffic pattern dependant |
Recommended power supplies | CPE: Ubiquiti POE-50-60W |
BTS: Ubiquiti POE-54-80W
Netonix POE switch configured to 48VH 1.5A |
|
Surge suppression | Ethernet surge suppression at both client and base stations is required.
Lightning surge suppression is required on base station radio to antenna connection. |
Mechanical - OLD
Dimensions | Base Station | Client Station |
Weight | 4.35Kg | 2.81Kg |
Housing | 31cm x 31cm x 8.5cm | 24cm x 24cm x 11cm |
Mounting | 1 Female RJ45 IP67 RJ45 connector. Auto-sensing 10/100-T Ethernet | |
Antenna | 2 Female IP67 N-type connector | |
Other | Pressure equalisation vent |
Custom enclosures available for 8W, vehicular or maritime applications. 8W version requires external DC power supply.
Environmental - OLD
Operating Temperature | -40C to +50C (external); -40C to +85C (internal) | |
Humidity | 5%-100% | |
Electrostatic Discharge | 15kV air, 10kV contact (power cycle may be required) | |
Altitude Temperature De-rating | Altitude (m) | Temperature (C) |
0 | 0 to +50.0 | |
1500 | 0 to +47.3 | |
3000 | 0 to +44.3 | |
4500 | 0 to +41.1 |